Stainless Steel StableLoad® Suspension Stabilizer

 

Watch Us on Truck U

The StableLoad® suspension enhancement dramatically improves vehicle handling characteristics by "pre-engaging" your factory vehicle suspension. This causes a stabilizing effect by activating your truck's suspension sooner as intended by the vehicle manufacturer. Once you begin to tow or haul with your truck, pressure is applied on the factory overload springs of your vehicle’s suspension. The leaf springs on your vehicle are designed as a spring pack with upper and lower overload leaf springs. When the vehicle is loaded the spring pack engages. The problem is that there isn’t enough stability to support the load, resulting in poor handling characteristics such as truck sag, side to side sway, body roll, and porpoising.

The lower quick-disconnect StableLoad® is now available in stainless steel! Our engineers developed these ultra high performance suspension enhancements to handle the toughest climates and terrain. Whether you head out onto the coastal beaches or up to the mountain heights into the snow and ice where harsh chemical treatments are prevalent, nothing outperforms stainless steel StableLoads.

Find My STABLELOAD®

!!IMPORTANT!! This application guide is a PARTIAL LIST of the most popular vehicle applications. Due to the hundreds of makes and models on the road not all of the vehicles that can use the STABLELOAD® are listed in this application guide.

Do not see your vehicle listed? CLICK HERE

Due to varying suspension options not all vehicle models come equipped with factory overloads. Before ordering your STABLELOAD®, please first verify that your vehicle came equipped with factory overloads, and what type of overload, (upper overload or lower overload)your vehicle is equipped with.

Year:
Make:
Model:

Details

leafsprings SilverSS*Stainless steel available for lower StableLoad® only. When both upper StableLoad® and lower StableLoad® are used together, they can often resolve all of your towing and handling issues

Stainless Steel StableLoad® Suspension Upgrade Features

  • The StableLoad® suspension upgrade is the only overload suspension system that follows the two major truck manufacturing laws of suspension:
    Law 1: Must be uncompromisingly comfortable as a passenger vehicle
    Law 2: Must ride safely without compromising comfort while towing and hauling
  • Dramatically improves safety and comfort by directly combating excess side to side sway, body roll, porpoising and truck sag while towing and hauling
  • Ability to engage and disengage in seconds*
  • Made of stainless steel to keep the StableLoads looking new without a layer of protective powder coat
  • Universal fit for all vehicles with factory installed upper or lower overloads
  • Quad contact design complements the vehicle’s specially engineered suspension that automotive manufacturers have invested millions of dollars designing, while all other rear suspension products reduce contact to only two points
  • 30 day money back guarantee - we are confident that once you try the StableLoad, you'll never want to tow or haul without them again
  • Quick no-drill installation**
  • Enhances airbag performance by lowering airbag overload air pressure and activating the factory overloads
  • Kit includes four StableLoads (outfits one complete vehicle)
  • Legendary Lifetime Warranty includes coverage for the vehicle factory leaf springs
  • Proudly made in the USA
* Applies only to the StableLoad® Quick Disconnect (Lower Overload).
** Does not apply to the StableLoad® Quick Disconnect (Lower Overload) (with Drill Kit).
 
Due to the dramatic improvement in overall handling characteristics from the StableLoad® and its extremely low cost,* we recommend any suspension enhancement upgrades start with the StableLoad® and that the vehicle operator evaluate as to whether any further upgrades are needed as often times the StableLoad® suspension enhancement qualities are found to be more than enough improvement and no further costly suspension equipment may be required.**

* When compared to other suspension upgrade products, the StableLoad® costs up to 50% less.
** Further upgrading or product additions for vehicle suspension is the responsibility and made solely at the discretion of the vehicle owner/operator.

See why the Stainless Steel StableLoad® is the first suspension upgrade you should turn to!

 Stainless Steel StableLoad®AirbagsSway BarsShocks
Parts MSRP Starting at $437.99* $423.18 $593.13 $624.76
Parts & installation $567.99 - $697.99* $683.18 - $813.18 $983.13 - $1,113.13 $1,144.76
Install time 1-2 hours** 2-3 hours 3-4 hours 4 hours
Easy DIY checkok       checkok
Eliminates body roll & side-to-side sway checkok   checkok   
Eliminates sag & levels your ride checkok  checkok    checkok 
Dramatically improves safety & handling checkok    checkok  checkok 
No-drill application available checkok  checkok  checkok  checkok 
Fully engages & disengages in seconds checkok†      
100% American-made checkok    ***  
Legendary Lifetime Warranty checkok    ***  
Warranty extends to the leaf springs checkok       
24/7 customer service checkok       
(*Prices may vary due to shipping and installation costs) 
** Installation times may vary with drill kits. 
*** Some manufacturers offer American-made sway bars with a lifetime warranty.
†Applies only to quick disconnect StableLoad® models:  require a minimum of 1 inch of clearance between the StableLoad® and the tire.

STABLELOAD® Suspension Upgrade

No-Drill StableLoad® Quick Disconnect (Lower Overload) – MFG Part Number: A7310s

ssal 24cA7310s StableLoad® assembly out of useThis StableLoad® Suspension Upgrade is specifically designed for vehicles that have pre-drilled leaf springs from the factory. The Stainless Steel StableLoad® Quick Disconnect no-drill kit is available for a very quick and simple no-drill installation with amazing results. Each precision crafted StableLoad® kit carries our Legendary Lifetime Warranty and is proudly made in the USA. 

StableLoad® Quick Disconnect (Lower Overload) – MFG Part Number: A7311s

This StableLoad® Suspension Stabilizer kit is a universal application and is designed for vehicles that do NOT have factory pre-drilled holes in their leaf springs. This kit comes with two specially treated drill bits and specific instructions for drilling the required (four) 7/16" diameter holes through the ends of the lower overload. The average time to complete the drilling process is approximately 35 minutes. Each precision crafted stainless steel StableLoad® kit carries our Legendary Lifetime Warranty and is proudly made in the USA.

StableLoad Drill KitTorklift StableLoad® drill toolThe StableLoad® Drill tool is available to rent for FREE.  We require a $100 refundable deposit. Customer pays freight to return the tool. Tool must be returned within 30 days or deposit is forfeited. Tool comes with 2 extra drill bits. If additional drill bits are needed, we provide them for an additional $10 each.

For more information, call us at 800.246.8132 or rent our StableLoad drill tool.

PLEASE NOTE: Use of the StableLoad drill tool is NOT required to install your StableLoads that require drilling - it just makes the process faster. Air tools with the provided drill bits in your StableLoad kit also work. 

Check out how easy it is to drill your leaf springs – takes just 37 seconds!

No-Drill StableLoad® Quick Disconnect (Lower Overload) – MFG Part Number A7312s

StableLoad Suspension Stabilizer No drillA7312s StableLoad® assembly out of useThis StableLoad® Suspension Upgrade is specifically designed for 2017 – 2024 Ford Super Duty trucks. No drilling is required for this installation but it does require 1/8” dimpling of the spring for installation. Each precision crafted StableLoad® kit carries our Legendary Lifetime Warranty and is proudly made in the USA.